Automatic Lasers


Construction laser

Cross line laser

Dot laser tools

Dual grade laser

Green beam laser

Interior laser

Laser detector

Interior multiline laser

Pipe installation laser

Plumb laser

Single grade laser


Automatic Levels


Digital electronic level

Automatic dumpy level


Leica Disto


Leica disto D210

Leica disto X310

Leica disto D3aBT

Leica disto D510

Leica disto D810

Disto accessory


Laser Calibration 

Laser level repair


Cable Locators


Leica digicat 550i

Leica digimouse

Leica digitex

Leica digitrace

Pipe locator

Signal clamp


Machine Control


2D control system

Machine control system

Leica digging system

Universal receiver

Rail Alignment

RS 4000 system


Total Station


Electronic theodolite

Leica total station

Topcon theodolite 

                      LASER     SONICS                                                                                                                                                                                                                                                                                Home | Product Price | Contact Us

Automatic Dural Grade Laser:


Mikrofyn dual grade laser ML 13

The Mikrofyn ML 13x is a semi-automatic Dual Slope Laser with features like the Mikrofyn ML 14i except Scanning, Remote Control and adjustment of rpm. Dual Slope - To use slope simply press the manual button, X- or Y- direction and then enter the slope desired using the Up/Down button. The Mikrofyn ML 13x will start from its level position and tilt the rotor to the entered slope. After achieving the desired slope, a slope alert will be activated.


Slope Alert - The Slope Alert communicates to the user if the instrument is distributed. The Slope Alert of the Mikrofyn ML 11, ML 13 & ML 14 can be set in the Off/Course/-Fine position by the operator depending upon the work requirements. No need to match points, just dial in the slope and go to work.



Fast and Easy Setup - Fully automatic self-leveling allows the operator to setup with just the push of one button. No level bubbles or screws to adjust! Large +/-9% (+/-5 degrees) self-leveling range makes this possible! During work, the automatic self-levelling keeps the beam horizontal, even as the laser is exposed to knocks and vibration. The large LCD display shows all setting and the battery condition.

Rugged design - The Mikrofyn ML 13x is built to be strong and robust, with the rotor head sealed in a glass housing, making the laser 100% watertight and dust-proof. 600 RPM makes the Mikrofyn ML 13x perfect for machine control applications as well as use with normal handheld detectors. The Mikrofyn ML 13x is supplied in a transport case with batteries, fast charger and Hand Detector HS 10.

link: Mikrofyn dual grade laser ML13 


Technical Specifications Mikrofyn ML13:

Working range (with laser sensor):




Levelling range:

+/-5 degree

Grade adjustment range, semi-automatic:

0 - 10%

Rotational speed, rpm:



Diode: 650 nm
Maximum output: 2.5 mW

Laser class:

Class 3A

Battery :

7.2 V - 1.4 Ah.
Battery life, approx.: 20 hours
Recharge time, approx.: 1 hour


Yes (IP68)

Dimensions (L x W x H), mm:

195 x 110 x 180

Weight with battery:

1800 g