Robotoolz RT-7715-2 cross line level laser

Super High Visibility Beams  

140 degree Fan Angle: 140 degree vertical and 120 degree horizontal fan angles gives you amazing line lengths for limitless layout versatility.

Variable Beam Options: Precision, vertical and horizontal lines operate simultaneously or independent of each other for countless level and plumb applications.

Locked Line Angle: Take unit out of self-levelling mode and lock line in place allowing you to set unit at any angle.

Automatic Levelling: The gravity levelled pendulum self levelling mechanism eliminates set up time and guarantees accuracy.

Automatic Out of Level Sensing: The visual (blinking laser beam) out of level indication signals if the unit is out of level after initial set up. This eliminates tool status checks and costly errors, saving time and money.

Multipurpose Attachment Accessory: Set up 45 degree angles on all lines and rotate 360 degree. Strong magnets, tripod mount and straps allow for attachment of the tool to a variety of different surfaces including metal studs, wooden beams and tripods.

Includes: RT-7715-2, multipurpose attachment accessory, belt pouch, mounting strap, user guide and 3 "AA" batteries.

Robotoolz RT-7510-3 laser  

3 beam Robo Vector laser plumb pointer.

Automatic Levelling: The automatic levelling mechanism eliminates set up time, guarantees accuracy and the repeatable transfer of points to multiple locations.

Automatic Out of Level Sensing: The visual (blinking laser beam) out of level indication signals if the unit is out of level after initial set up. This eliminates tool status checks and costly errors, saving time and money

Multipurpose Attachment Accessory: Attachment accessory with strong magnets, tripod mounts and straps allow for attachment of the tool to a variety of different surfaces including metal studs, wooden beams and tripods. Field Recalibration: Easy field recalibration guarantees performance to specification and keeps the tool on the jobsite, saving time and money

Carpentry: Level and set cabinets and counter tops. Install trim and millwork; Stair layout; Level and plumb decks; Plumb framing and partition walls; Plumb window and door frames. Concrete: Set forms and footings. Electrical: Level electrical outlets; Transfer lighting layout from floor to ceiling. Plumbing: Layout piping, sewer lines, drainage and feed lines; Transfer sprinkler system layout from floor to ceiling.

Robotoolz RT-7610-5 level laser

Electronic levelling Robo Vector laser plumb pointer.

The RoboVector is a self-levelling, visible beam, 5-beam set-out laser. Five self-levelling, orthogonal (90 degree) beams provide simultaneous plumb, level and square reference points both indoors and outdoors.  Range is nominally 30m. Plumb, level and 90 degree accuracy +/- 3.2mm at 30m.   Class II, 635nm laser diode. User can recalibrate unit. Small and easy to use (approx 100 x 75 x 40mm). Out-of-level indicator (laser blinks).

Three AA alkaline batteries last approx 20 hrs. Pack includes RoboVector laser with magnetic mount, laser enhancing glasses, mounting strap, case, and owners manual. Has camera tripod mount 1/4" x 20tpi fitting) and dumpy tripod mount (5/8" x 11tpi fitting). Tripod not included.  One year limited warranty: 60 days unconditional warranty.

Laser provides plumb, level and square reference points instantly and accurately

Working range up to 30m (depending on light conditions)

Ruggedly constructed multipurpose tool

Dust, dirt and water resistant.

Compensator is locked when laser is switched off to greatly extend the life of this laser

complete with : target, glasses, magnetic mounting bracket & carrying case.

Robotoolz RT-5250-2XP laser level - High power automatic levelling laser

The high powered laser provides the construction professional with all the benefits of a self levelling laser level and the flexibility of 90 degree plumb beam capability. Robotoolz E plane laser level h/v & 10% man grade.

Level, Plumb and Squaring Beams: Three spin speeds, two adjustable line lengths and pointing (dot) modes along with a 90 degree plumb beam allows customization of the beam length and brightness to meet specific level, plumb and squaring applications for both in and outdoor work.

Electronic Automatic Levelling: The electronic operated automatic levelling mechanism eliminates set up time and guarantees accuracy and the repeatable transfer of points to multiple locations. Automatic Out of Level Sensing (level applications only): Audio (beeper) and visual (blinking laser beam) out of level indication signals if the unit is out of level after initial set up.

Robotoolz RT 7690-2 rotating laser level

Dual Pendulum Automatic Levelling Technology: Patented dual pendulum automatic leveling system utilizes gravity to consistently automatic level, eliminate set up time guarantee accuracy and transfer reference points to multiple locations with high repeatability.

Remote controlled simultaneous level and plumb. Level, Plumb and Cross liner Beams: Six adjustable line lengths and three variable speed spin modes allow customization of the beam lengths and brightness to meet the specific level, plumb and cross liner applications and lighting conditions. the included laser beam detector/receiver can be used to detect the laser beam in lighting conditions where the beam is not visible, even in bright sunlight. Radio Frequency (RF) Remote Control: The RF remote control allows for non-directional, unobstructed operation of all the laser functions anywhere on a cluttered jobsite. No line of sight required. the remote control allows for one-man operation of the laser system from the point of application, saving time and labour.

Robotoolz RT-7210-1 level laser

Application:  
Carpentry: Level and set cabinets and counter tops; Install trim and millwork; level decks.
Concrete: Set forms and footings.
Electrical: Level electrical outlets; Check conduit clearance.
Plumbing: Set grade.
Other: Set ridge beams; Install siding, wall time and masonry walls; Set landscape grade.

Automatic Levelling: The patented pendulum self levelling system utilizes gravity to consistently self level, eliminate set up time, guarantee accuracy and transfer reference points to multiple locations with high repeatability.

Line or Dot Mode: The option of a dot or line allows the choice of beam visibility and mode that best meets the level application requirements. The extra bright dotted line provides a beam brightness three times that of a line, eliminating the need for a detector.

RoboToolz Laser Detector ( Remote Control )

DETECTOR FOR RT-7690-2 Features:

The RoboToolz laser detector is designed to work with RoboToolz base unit model RT-7690-2XP only. It features a two sided LCD and allows for laser beam detection indoors and outdoors, under lighting conditions where beam visibility is poor. It extends the range of you RT-7690 series laser up to 1000 feet (300m).

The RF remote control allows for non-directional, unobstructed operation anywhere on a busy jobsite up to 500 feet (150m). No line of sight required. The remote control allows for one-man operation of a laser system from the point of application, saving time and labor.

RoboToolz Laser detector ( receiver ) for RT-5250-2xp & RT-3620-2

Two sided LCD display

Low Battery Indicator

Audible Line Alert: On/Off Beeper

Works with RT-5250-2XP, RT-3620-2K and most rotational infrared lasers

RoboToolz Wall/Ceiling Mount

RoboToolz Wall/Ceiling Mount is a sturdy platform that secures easily to walls and T-bar framing, beams, walls and chair railings.

Platform pivots for easy storage.

Inches/Centimeters scale.

Constructed of heavy duty metal for durability.

Works with RoboTool models: RT-7690-2XP, RT-5250-2XP, RT-7210-1, RT-7610-5, RT-7510-3, RT-3620-2, and RT-3610-3

RoboToolz Interior Laser Pole

The adjustable laser platform allows you to position the laser tool at heights ranging from as low as 8 inches up to 12 feet. The standard 5/8" x 11 threaded insert lets you mount a wide variety of laser tools.

The five metal pole sections (graduated in 2 foot increments) are constructed for durability and ensures no breaking or warping.

An opening in the laser platform allows for the detection of a downward plumb beam.

Works with models RT-5250-2XP, RT-7210-1, RT-7610-5, RT-7510-3 and RT-3620-2.