The Leica Digisystem has a range of accessories which extend the capabilities of the main products. The accessories, with the exception of the Digimouse (sonde) are used in conjunction with the Leica Digicat locators and Leica Digitex signal transmitters to trace the more tricky buried services such as sewers and ducts.
Accessories are an important part of the Leica Digisystem range and are frequently used in conjunction with the Digicat locators and Digitex signal transmitters, to improve the detection of buried utilities which may have a poor or no traceable signal on them. They can also be used to trace buried utilities which may be of non-metallic construction.
Digitrace
The Digitrace enables non-metallic drains, ducts or pipes, up to 150mm in diameter, to be traced when used in conjunction with the Leica Digicat and Digitex signal transmitter.
The Digitrace's coiled fibreglass rod, which protects the central copper tracing conductor, is available in lengths of 30 metres, 50 metres or 80 metres.
The fibreglass rod is inserted and pushed along in the service under investigation. The Leica Digitex is connected and the tracing signal is located on the surface by the Leica Digicat.
Property Connection Set
The property connection set provides a safe technique of applying a traceable signal to live electricity cables going to a domestic dwelling or similar. It is connected to the Leica Digitex signal transmitter and a live electrical socket.
The electrical supply is not interrupted by the applied signal and the risk of serious injury is greatly reduced.
Signal Clamp
The signal clamp provides a safe technique of applying a signal to utilities such as telecom and electrical cables. It is connected to the Leica Digitex signal transmitter and then clamped around the service. The utility supply is not interrupted by the applied signal.
Leica Digitex Connection Cable Set Extension
The Leica Digitex connection cable
set extension provides operators with an additional 10 metres of cable. This is used to extend the red or black cable of the Digitex connection cable set.
Signal Clamp
The signal clamp provides a safe technique of applying a signal to utilities such as telecom and electrical cables. It is connected to the Leica Digitex signal transmitter and then clamped around the service. The utility supply is not interrupted by the applied signal.
Leica Digitex Connection Cable Set Extension
The Leica Digitex connection cable
set extension provides operators with an additional 10 metres of cable. This is used to extend the red or black cable of the Digitex connection cable set.
Features |
Digitrace 30 / 50 / 80 |
Signal Clamp |
Digimouse (Sonde) |
Property Connection |
8kHz Mode |
Dependent on Transmitter |
|
x |
|
33kHz Mode |
Dependent on Transmitter |
x |
x |
x |
Mixed 8/33 |
Dependent on Transmitter |
|
|
|
512Hz Mode |
Dependent on Transmitter |
|
|
|
640Hz Mode |
Dependent on Transmitter |
|
|
|
Protection |
IP54 |
IP54 |
IP54 |
IP54 |
Working Temperature |
-20C to +50C |
-20C to +50C |
-20C to +50C |
-20C to +50C |
Battery Type |
Not required |
Not required |
1 x LR6 (AA) alkaline |
Not required |
Battery Life (Typical Use at 20C) |
|
|
40hrs intermittent use at 20C/68F in 8kHz mode or 33kHz mode |
|
Weight |
3kg / 3.25kg / 3.5kg |
354g |
0.18kg |
150g |
>
Dimensions |
Frame - 490mm (H) x 210mm (D) x 440mm (W), 8 mm rod diameter, 13mm tip diameter |
40mm (H) x 250mm (D) x 142mm (W) exc Cable Internal diameter 100mm |
38mm (Dia) x 120mm (W) |
40mm (H) x 80mm (D) x 100mm (W) |
|